Spindle sanders are the best tool for woodworking and it is used to build furniture. Some people do it by their own hand but sanding by hand is a time-consuming process and it does not provide a perfect finish. An oscillating spindle sander is most popular among all sanders. It provides fine-tuning to the woods. spindle sanders are available in different sizes and shapes. Some sanders are floor spindle sanders that work as a standalone unit and others are benchtop spindle sanders that are mounted on a benchtop. Some spindles are handheld and others are portable. A typical oscillating spindle sander has a circular drum covered with a sleeve of sandpaper which moves up and down simultaneously to prevent burning the wood up.

Types of spindle sanders

Floor spindle sanders: Floor spindle sanders are expensive and big in size. These spindles are used for heavy commercial projects.
Benchtop spindle sanders: These spindles are budget-friendly and small in size.
Handheld Spindle Sanders: If you are a beginner then this handheld option would be the right choice for you. It is cheaper and easy to use as well.

So, Today in this article, we’ll be covering the top 10 best oscillating spindle sanders. We’ll also be covering the pros and cons as well. Please go through the complete article before you decide which one to buy.

Things to keep in mind before buying a Spindle Sander

Decide Your Job: As there are varieties of spindle available in the market. Each one has its own purpose and suitable for a particular job. So, before buying a spindle, you check what is your requirement, and as per that you make your decision.

Price: If you are a beginner woodworker, then you might not be willing to spend your money on some heavy-duty spindle. Better, you start with one affordable model and gradually you can ante up your game. So, choose the one which fits your budget.

Safety: This should be your topmost priority. These are power tools and a simple mistake can be hazardous. There are also a lot of fake models available in the market. It’s recommended to go for the branded ones.

WEN AT6535 3.5-Amp Oscillating Spindle Sander

This Model has received really good reviews online and loved by a lot of users. It weighs around 33.2 pounds. Its dimensions are 14.75 x 14.75 x 16.75 inches. It comes with a beveling table with a grid rating of 80. This is a corded tool and there are no batteries required for this particular model. Below are some of the pros and cons of this model.

PROS & CONS

Pros

It comes with a 2000 motor which provides good power and you can easily work with hard material.
You get spindle oscillation around 58 times per minute with a 5/8 inch stroke.
With this model, you also get five different sanding sleeves as well which are 1/2, 3/4, 1, 1-1/2, and 2 inches.
It is a spacious model with a size of 14-1/2 and 14-1/2-inch tables that bevels up to 45 degrees.
It also includes a dust port, ten throat plates, five 80-grit sanding sleeves, and four rubber sanding drums.
It comes with a two-year warranty.

Cons

Cons
some users complained about its noise.
sometimes it wobbles due to its largest drum.

WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander

this versatile and reliable sander sands smoothly and removes all the rugged edges. the dimensions of this product are 22 x 11 x 12.5 inches and the weight of the product is 39 pounds. it comes with a 4.3 amp 1/2 HP motor that prevents this machine from bogging down under heavy load. you can also switch and replace sandpaper grits quickly when needed. It has a spacious 4-inch-by-36-inch belt that tilts anywhere from 0 to 90 degrees and its heavy cast iron prevents vibrations. It also includes a 6-inch sanding disc that sands the workpiece according to your desires.

PROS & CONS

Pros

It has an 80 grit sanding belt and sanding disc.
It comes with a beveling work table with an extended safety guard.
They also provide a 2.25-inch Dust Port.
The belt can be tilt anywhere from 0 to 90 degrees.
The heavy cast iron base prevents vibrations.
Its 4.3 amp motor provides 3600 RPM speed.

Cons

It works well but dusty.

WEN 6524 Oscillating Belt and Spindle Sander

You can make faces, arcs, curves, contours, and many more with this oscillating belt. Its weight around 27 pounds and its dimensions are 18.5 x 16.5 x 18 inches. It has an Oscillating Belt and Spindle Sander. This belt oscillates up to 58 times per minute. It also includes a beveling work table, four rubber sanding drums, one belt sanding attachment, five throat plate, and six pieces of 80 grit sandpaper. Its grit rating is 80. you can fix a dust collection system with this sander to avoid the mess and it helps you to clean up.

PROS & CONS

Pros

This versatile sander is durable and efficient.
It has a different sized drum that is 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch, and 2 inches and one 4 x 24-inch belt.
Its 3.5 amp motor oscillates 58 times per minute with a 5/8-inch stroke.
The belt speed is up to 1575 FPM and spindle speeds up to 2000 RPM.

Cons

difficult to set up and operate due to the optional drum or belt sanding attachments.

WEN HA5932 5-Amp Variable Speed Portable Oscillating Spindle Sander

This portable oscillating sander can sand all the complicated curves in your woodwork. It can work as a handheld oscillating sander and you can also mount it onto a benchtop unit. It is equipped with a 5 amp variable motor that spins at a speed of 1800 TO 3000 RPM. Its oscillates rate is between 50 to 90 oscillates per minute. It also includes four drums that helps you to make different types of projects. This small oscillating spindle sander can be used in hard to reach places. It includes four different sanding spindle diameters of 1/2 inch, 3/4 inch, 1 inch, and 1-1/2 inch spindles.

PROS & CONS

Pros

It is lightweight and portable.
It is easily transformed into a stationary benchtop.
It comes with a powerful 5-amp variable speed motor.
It comes with four 80-grit sanding sleeves, one non-marring rubber mounting pad, and three rubber drums,
It provides a two-year warranty.

Cons

It is not suitable for large projects.
It is not sturdy due to its lightweight.

Shop Fox W1831 1/2 HP Single Phase Oscillating Spindle Sander

This oscillating spindle sander is not only quiet and portable but also powerful and durable. Its 3.5 amp single phase motor that operates its spindle at 2000 RPM speed and oscillates at 58 opms. It has a built-in 1 ½” dust port to keep your workplace tidy and clean. This versatile sander have 6 different spindles from ½” to 3”. It has 15” x 11 ½” durable cast iron table that sits on a lightweight base. It comes with safety features like locking power switch and removable key that prevents accidents and unauthorized access. It has an onboard storage for storing sanding spindles

PROS & CONS

Pros

Stable and durable.
easy setup and use.
small footprints take less space.
run smooth and quiet.
affordable price.
2-year warranty.

Cons

the dust port is small.
motor cant takes more pressure.

Triton TSPS450 3.5Amp Cast Iron Top Oscillating Spindle Sander, Orange

The triton oscillating spindle sander comes with large cast iron table with the measure of 11 ½” x 14 ½” that provides stability and support for large work piece to work on. The spin speed of oscillating spindle is 2000 rpms and oscillation rate is 58 opms. Its ½ HP, 3.5 Amp motor provides quiet operation.This versatile spindle comes with 6 rubber drums and sanding sleeves at sizes from ½” up to 3” in diameter. The weight of this spindle is 36 pounds and its small footprint covers less space on your workbench. This sander is easy to setup and operate that makes it great choice for beginners. this budget friendly sander performs well.

PROS & CONS

Pros

It is ideal for sanding contours, arcs, curves & other irregular shapes.
This efficient sander provides a precision finish.
Its powerful motor provides rotating and oscillating action with increased speed.
It includes 6 sanding sleeves with rubber drums and tablet inserts.
It provides onboard storage for all accessories.
this sander works well on small to mid-sized projects at affordable prices.

Cons

this sander doesn’t come with a dust port.
a lightweight motor makes bigger projects.

Ridgid EB4424 Sander, Oscillating/Edge Belt

Rigid sander attracts all the users due to its multifunction features. Its ball bearing engineering feature enhances smooth functionality and durability. It performs oscillating and rotary motion that provides scratch free and burn free finishes on edges, contours and curve designs. Its important feature is tool free conversion from belt to spindle that performs various tasks accordingly. Its table can be tilt to 45 degrees to enable sanding of bevel edges. It has 4 by 24 inches belt and set of sleeves to ensure a smooth functioning of this tool. The spindle speed is 1725 rpm. This sander also includes a built in saw dust collector, hose adapter. It has 5 amp, ¾ HP motor that operates the sander at 1725 rpms on the spindle and 1350 rpms on the belt that reduces friction to keep things cool.

PROS & CONS

Pros

pros
This 2 in 1 versatile tool provides belt sanding as well as spindle sanding.
It comes with a large capacity dust port to keep your workplace cleaner.
It provides heavy-duty construction for durability and stability.
It doesn’t provide onboard storage.

Cons

no warranty
quiet pricey.

POWERTEC OS1000 2.6 Amp Benchtop Oscillating Spindle Sander

powertec oscillating spindle sander is sturdy and reliable. It is equipped with 2/5 HP 110V motor that oscillates the spindle at 30 ospms with 1725 rpms speed. It has the ability to tilt the table upto 45 degrees. its built in storage allows you quick access and easy organization of accessories. This oscillating sander comes with 6, 80-grit sander sleeves, 5 rubber sandpaper drums, 6 table inserts, 5 drum washers and 1 spindle knob. This sander provides sturdy and stable full coverage work table. It comes with onboard storage for all of your sander parts. It has a high functional built-in dust collection system with a 2 inch port that keeps your workplace clean and clear.

PROS & CONS

Pros

stable and reliable.
a comfortable large rounded 14-inches diameter table.
six spindles with different diameters provide handiness.
a convenient in-built dust port.

Cons

Dust port comes in metric system sizes which makes attaching a collector frustrating.

EJWOX Portable Handheld Oscillating Spindle Sander

EJWOX handheld oscillating spindle sander is as portable as you can take with you anywhere especially in your jobsite. The weight of this sander is 5 lbs and it is equipped with 5 amp 120 volts motor.The speed of this sander can be varied from 1800 to 3200 RPM and the oscillation can be varied from 50 to 90 SPM that provides a burn free sanding operation. It is equipped with a keyless locking bolt that allows you to easy and quick swap out pre-loaded sanding drums.

PROS & CONS

Pros

It can be used as a handheld as well as a mounted sander.
It is an extremely lightweight tool.
a very fast spindle speed available at this price.

Cons

no warranty description available.
Its lightweight affects mounted operation.

POWERTEC OS1400 2.6 Amp Benchtop Oscillating Spindle Sander

This traditional sander can work on various styles like contours, arcs, and curves and it is easy to use. This efficient unit provides great working speed. Its powerful motor provides 30 oscillations per minute.` Its weigh around 31 pounds with small footprints so it takes less space and easy to port It comes with 14 inches diameter cast iron and round table that is sufficient enough to work on. It is also equipped with built in dust port that keeps your area tidy and clean. Its 2.6 amp induction motor provides 1800 RPMS that prevents scroching.

PROS & CONS

Pros

This sander is easy to set up and operate, even for inexperienced users.
an affordable unit comes with a dust port.

Cons

It is not sturdy and durable.